The ViVi Nova or Mini ViVi Nova: Assembly and Use

Here is what your new ViVi Nova or Mini ViVi Nova looks like in the package when it first arrives.  The body is on the left and there are two replacement heads on the right:

 

First, remove the body of the ViVi from the package:

Next, pull off the protective plastic cover from the mouthpiece.  You can discard it or save it for storing your replaceable heads when not in use:

  

The ViVi Nova comes with a removable black plastic mouthpiece (also called a drip tip).  You can remove it by pulling firmly.

If preferred, the drip tip can be replaced by any other 510 drip tip of your choice!

To disassemble the unit, start by unscrewing the top from the plastic body:

The plastic body itself then unscrews from the base:

 

The metal base is made up of two parts: the base itself and the replaceable head or wick:

Unscrew the replaceable head from the metal stem and replace it with a new one as needed:

Your ViVi Nova comes with three replaceable heads (one installed and two in your package).  The installed head is 2.4 ohms and the two replacement heads are 1.8 and 2.8 ohms.  Click for help understanding ohms.  If you look closely at the replaceable head, you will see the ohm rating engraved in the metal:

Once your replaceable head is reinstalled, screw the body of the unit back into place:

From here, you are ready to fill the tank with e-liquid.  

 

When filling, you want to fill from all sides but avoiding getting e-liquid into the central tube:

 

Use the glass dropper that comes with your Virgin Vapor e-liquid to fill the tank. Don't fill it past the upper milliliter mark, leaving some room at the top.

Once filled, screw the top back firmly onto the body of the tank.

 

You're now ready to vape!  Here's a ViVi Nova pictured with one of our engraved steel batteries and a ViVi Nova cone:

 

Don't hesitate to contact us at: customerservice@virginvapor.com for help with any questions you might have!